Scheibe - DIN 6340

DIN / ISO:	DIN 6340 and similar
Element type:	Discs
Material:	Steel
Type:	Mechanical clamping elements

Zubehör

Stud screw - DIN 6379 | SM 1100

Diameter: M18 | Length: 160 | Quality: 8.8

Material: steel, heat-treated: M06 - M12: grade 10.9M14 - M42: grade 8.8M12 - M24: grade 12.9 rolled threadRemaining quantities are available from SM 1100M22X250 8.8, SM 1100M22X350 8.8. The articles are not available for re-purchase. RoHS-compliant: yes

Variants from €1.38* incl. VAT

€10.86* incl. VAT

Details

T-bolt -DIN 787 | SM 1105

Diameter: M16 | Groove a: 18,00 | Length: 100 | Quality: 12.9

Material: steel, heat-treated M06 - M12 grade: 10.9M14 - M42 grade: 8.8M10 - M24 grade: 12.9 forged, T-slot guid-faces milled, rolled thread. RoHS-compliant: yes

Variants from €9.82* incl. VAT

€19.47* incl. VAT

Details

Hexagon nut | SM 1120

with spherical contact surface on one sideDIN 6330 and similar Material: ST: steel, grade 10NI: stainless steel Article with selection option with "SW"correspond to the old standard. Suitable for this parts: Flat end matching hardened washers SM 1125 / DIN 6340. With spherical end matching taper face of washers SM 1130D or G / DIN 6319 D or G.Ball radius "r" suitable for tapered cups SM 1130 D / DIN 6319.To compensate for non-parallel clamping surfaces. m = 1.5 x d. RoHS-compliant: yes

From €0.71* incl. VAT

Details

Nut for T-slots - DIN 508 | SM 1135

Material: Steel | Size: 12 | Thread: M10

DIN 508 / ISO 299 Material:ST 10: heat-treated steel, tempered, grade 10, blackened ST 8: heat-treated steel, quality 8, bright (on request)NI: Stainless steel 1.4301 (on request) Not all dimensions are part of the german DIN. RoHS-compliant: yes

Variants from €1.77* incl. VAT

€2.40* incl. VAT

Details

Ähnliche Artikel

Washer, ground | SM 1125-1

surface-ground on both sidessim. to DIN 6340 Material: steel, hadened and on both sides surface grinded RoHS-compliant: yes

From €2.95* incl. VAT

Details

Spacing washer | SM 1126

for countersunk screws Material: ST: steel, unhardened, zinc coatedNI: stainless steelPlease inquire: STB: Steel, turned, burnished Spacing washers are fastened with countersunk screws DIN 963 or DIN 7991 at the front faces of shaft ends and close these as a collar. Unwanted turning or loosening of the washer can be avoided with a cylindrical pin. RoHS-compliant: yes

From €1.02* incl. VAT

Details

Spherical washer - DIN 6319 | SM 1130 C

Material:ST: steel, case hardenedNI: stainless steel RoHS-compliant: yes

From €0.62* incl. VAT

Details

Conical seat D - DIN 6319 | SM 1130 D

Material: ST: steel, case hardenedNI: stainless steel Limited for use on flat closed ring areas (not allowed for elongated holes). RoHS-compliant: yes

From €0.81* incl. VAT

Details

Conical seat G - DIN 6319 | SM 1130 G

Material: ST: steel, heat-treatedNI: stainless steel Due to large dia and thickness more suitable to match slotted clamps. RoHS-compliant: yes

From €1.68* incl. VAT

Details

Spacer | SM 1270-10

for Spherical levelling washers SM 1270-9 Material: ST: steel, surface zinc plated and chromated NI: stainless steel When adjustment travel Δ h is insufficent, the spacer is utilized to bridge gaps. RoHS-compliant: yes

Price on request

Details