Passscheibe, beidseitig plangeschliffen

DIN / ISO:	DIN 6340 and similar
Element type:	Discs
Material:	Steel
Type:	Mechanical clamping elements

Ähnliche Artikel

Washer - DIN 6340 | SM 1125

Material: steel, tempered (1200-1400 N/mm2) RoHS-compliant: yes

From €0.92* incl. VAT

Spacing washer | SM 1126

for countersunk screws Material: ST: steel, unhardened, zinc coatedNI: stainless steelPlease inquire: STB: Steel, turned, burnished Spacing washers are fastened with countersunk screws DIN 963 or DIN 7991 at the front faces of shaft ends and close these as a collar. Unwanted turning or loosening of the washer can be avoided with a cylindrical pin. RoHS-compliant: yes

From €1.02* incl. VAT

Details

Spherical washer - DIN 6319 | SM 1130 C

Material:ST: steel, case hardenedNI: stainless steel RoHS-compliant: yes

From €0.61* incl. VAT

Details

Conical seat D - DIN 6319 | SM 1130 D

Material: ST: steel, case hardenedNI: stainless steel Limited for use on flat closed ring areas (not allowed for elongated holes). RoHS-compliant: yes

From €0.79* incl. VAT

Details

Conical seat G - DIN 6319 | SM 1130 G

Material: ST: steel, heat-treatedNI: stainless steel Due to large dia and thickness more suitable to match slotted clamps. RoHS-compliant: yes

From €1.40* incl. VAT

Details

Spacer | SM 1270-10

for Spherical levelling washers SM 1270-9 Material: ST: steel, surface zinc plated and chromated NI: stainless steel When adjustment travel Δ h is insufficent, the spacer is utilized to bridge gaps. RoHS-compliant: yes

Price on request

Details

Pressing washer | SM 1286

Material: special steelhardened, blackenedbackground ground RoHS-compliant: yes

From €4.91* incl. VAT

Details

Washer | SM 1291-14

Tapered washer Material: steel C45heat treated For hexagon socket head cap screws DIN 912 (SM1291).

From €1.25* incl. VAT

Details

Washer - DIN 125 A/ISO 7089 | SM 1291-13

Washer DIN 125 A / ISO 7089 Material: ST: Stahl, verzinkt NI: Edelstahl rostfrei KU: Teflon (weiß)

From €0.04* incl. VAT

Details

Zubehör

"Crocodile“ clamp |SM 1105

with counterholder, adjustable Material: steelbody: tempered and zinc plated Form A: without stud boltForm B: with stud bolt With captive compression piece and counter bearing. Specified clamping forces in optimal clamping position (smallest distance from the clamping screw to the clamping point). Clamping forces can vary depending clamping, strength class of the clamping screw and condition of the thread (lubrication). Use for all clamping tasks over T-grooves and nuten und threaded holes. The compression piece and the counterholder are connected undetachably to the clamping shoe. The clamping plate is equipped with two clamping surfaces and can be easily turned depending on use.RoHS-compliant: yes

From €90.96* incl. VAT

Details

Washer, ground | SM 1125-1

surface-ground on both sides
sim. to DIN 6340

Washer, ground | SM 1125-1

surface-ground on both sidessim. to DIN 6340

surface-ground on both sides
sim. to DIN 6340