Grub screw - DIN 6332 | SM1240

SCHOLZ MECHANIK GmbH

Variants table
Diameter 1	Length	Material	Product number	Unit price	Buy

Product information "Grub screw - DIN 6332 | SM1240"

with thrust point

Material:
steel, grade 5.8
STH: thrust point hardened
STU: thrust point unhardened
STZ: zinc plated, blue passivated, thrust point unhardened
stainless steel 14301
NI: thrust point unhardened

with hexagon socket

The thrust point of these screws DIN 6332 SM 1240 is designed to be used with or without the thrust pad SM 1270 or SM 1270-1 for clamping. The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw. Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created.

Mountage: You must hold the thrust point that the snap ring is sitting in the groove and the open side is looking downstairs. The bolt is to be pushed in by holding it incline as much as possible to the open side of the snap ring.

RoHS-compliant: yes

Compliance:	RoHS compliant
DIN / ISO:	DIN 6332
Element type:	Positioning and support pins, Threaded pins, bolts
Material:	Stainless steel, Steel
Speciality:	Pressure pin not hardened, Thrust pin hardened, with internal hexagon
Surface:	Steel - burnished, Steel - zinc plated

Zubehör

Thrust pad - DIN 6311 | SM 1270

with snap ring Material: ST: steel case hardened, blackenedNI: stainless steelSpring retainer inlayed.Use with tommy screws DIN 6304 / SM 1235 and DIN 6306 / SM 1236, with screws with pressure pins DIN 6332 / SM 1240 also as feet.The swivelling connection of the thrust pin and thrust piece enables adaptation to uneven clamping surfaces or clamping surfaces that are not perpendicular to the screw axis and prevents the rotary movement of the screw from being transferred to the clamping surface during clamping. Mountage: The thrust piece is to be held in such a way that the snap ring lies in the recess and points with the open side downwards. The bolt is tilted towards the open side of the snap ring as far as possible and pressed in. RoHS-compliant: yes

From €1.81* incl. VAT

Details

Thrust pad, flat - DIN 6311 | SM 1270-1

with snap ringMaterial: ST: steel case hardened, blackened NI: stainless steelSpring retainer inlayed.Low model with increased thrust area.Use with tommy screws DIN 6304 / SM 1235 and DIN 6306 / SM 1236, with screws with pressure pins DIN 6332 / SM 1240 also as feet. The swivelling connection of the thrust pin and thrust piece enables adaptation to uneven clamping surfaces or clamping surfaces that are not perpendicular to the screw axis and prevents the rotary movement of the screw from being transferred to the clamping surface during clamping.Mountage: The thrust piece is to be held in such a way that the snap ring lies in the recess and points with the open side downwards.The bolt is tilted towards the open side of the snap ring as far as possible and pressed in.RoHS-compliant: yes

From €3.86* incl. VAT

Details

Thrust pad | SM 1270-11

with or without plastic capMaterial:ST: steel case hardened, blackenedNI: stainless steelRetaining spring: Stainless steel 1.4310Plastic cap:natural color, (Polyacetal POM),temperature resistant up to100 °CForm A: without plastic capForm K: with plastic capThe thrust pieces adapt to uneven or cylindrical surfaces and prevent transmission of the rotary movement of the screw to the workpiece. The plastic caps prevent damage to delicate workpieces.Due to the special shape of the retaining spring, the thrust piece can be easily attached to the thrust pin and removed again without any problems.Use with tommy screws DIN 6304 / SM 1235 and DIN 6306 / SM 1236,with screws with pressure pins DIN 6332 / SM 1240 also as feet.RoHS-compliant: yes

From €2.64* incl. VAT

Details

ähnliche Artikel

Thrust screw | SM 1239

with bolt from plastic Material: ST: steel grade 5.8blackenedwith bolt from Polyacetal (POM) NI: stainless steelwith bolt from Polyacetal (POM) RoHS-compliant: yes Grub screwss with plastic boltd are used for secure fixing when damage and pressure points on sensitive clamping surfaces need to be avoided, e.g. in precision mechanics, electronics and furniture construction. They can be combined with a wide variety of clamping elements (clamping levers, star grips, knurled nuts). Also suitable as stop protection for conveyor belts.

From €1.27* incl. VAT

Details

Thrust screw | SM 1239-1

with bolt from brass Material: ST: steel grade 5.8blackenedwith bolt from brassNI: stainless steelwith bolt from brass RoHS-compliant: yes Thrust screws with bolt from brass are used for secure fixing when damage and pressure points on sensitive clamping surfaces need to be avoided, e.g. in precision mechanics, electronics and furniture construction. They can be combined with a wide variety of clamping elements (clamping levers, star grips, knurled nuts). Also suitable as stop protection for conveyor belts.

From €1.11* incl. VAT

Details