headless
Material: screw: Form A, B, BV, D, F, FV: steel, quality 12.9, blackenedForm AN, BN, BNV, FNV: stainless steelball: Form A, B, BV, F, FV: ball-bearing steel, hardenedForm AN, BN, BNV, FNV: stainless steelForm D: Thermoplast (POM)
Form B: with flattened ball, contact surface flat, without thread lock
with hexagon socket
from steel
Form BN: with flattened ball, contact surface flat, without thread lock
with hexagon socket
from stainless steel
Form BV: with flattened ball, contact surface flat, with thread lock
with hexagon socket
from steel
Form BNV: with flattened ball, contact surface flat, with thread lock
with hexagon socket
from stainless steel>Form F: with flattened ball, contact surface ridged, without thread lockwith hexagon socketfrom steelForm FV: with flattened ball, contact surface ridged, with thread lockwith hexagon socketfrom steelForm FVN: with flattened ball, contact surface ridged, with thread lockwith hexagon socketfrom stainless steel
RoHS-compliant: yes
Ball-ended thrust screws without head with hexagon socket are special fastening elements with a bearing ball integrated into the screw body. They are used when precise movements, exact positioning and even pressure distribution are required. Ball thrust screws can also be used for clamping, tensioning or supporting non-parallel surfaces. They are available with a full ball, a flattened ball with a flat surface and a flattened ball with a ribbed surface. The flattened, movable balls enable force to be transmitted over a wide area. We can supply ball thrust screws with a flattened ball with and without anti-rotation lock.
Material:NI: stainless steelST: steel, grade 5.8, blackened
Form A: without thread coatingForm B: with thread coating (polyamide allround coating)
RoHS-compliant: yesBlanking plugs made of steel or stainless steel without / with clamping lockfor sealing holes in components.
The high frictional resistance of the PRB (polyamide all-round coating) clamping lock prevents loosening, loosening or loss,
even under vibrations and loads.
roundwith fitting tolerance
Material: body: heat-treated steel, tempered, phosphatedinsert: carbide plate
With fitting tolerance.
Base body with internal thread for installation in clamping fixtures,
clamping jaws, clamping arms, gripper systems, etc.
For transmitting high torques and holding forces, e.g. on cast or forged parts.
RoHS-compliant: yes
roundwith fitting tolerance
Material: body: heat-treated steel, tempered, phosphatedinsert: carbide plate
For locating hole, body to be installed in jig and fixture systems. Clamping jaws, clamping arms, claw feed systems etc.
For transmitting high torques and holding forces, e.g. on cast or forged parts.
RoHS-compliant: yes
round
Material: carbide
Body to be installed in jig and fixture systems. Clamping jaws, clamping arms, claw feed systems etc., mounting by soldering or glueing or pressing in. Three positioning tabs secure against rotaring.For transmitting high torques and holding forces, e.g. on cast or forged parts.
RoHS-compliant: yes
round
Material: carbide
Body to be installed in jig and fixture systems. Clamping jaws, clamping arms, claw feed systems etc., mounting by soldering or glueing or pressing in. Three positioning tabs secure against rotaring.For transmitting high torques and holding forces.
RoHS-compliant: yes
Material: ST: steel C45 (equal St 60)bright
RoHS-compliant: yesDisc keys to DIN 6888 / ISO 3912 are used in shaft-hub connections in a similar way to feather keys for power transmission. They ensure a secure and positive connection and are used to transmit torque from the drive shaft to the gear wheel, for example.
round with ribbed carbide insert
Material: body: tool steel, blackenedinsert: carbide plate, brazed-in
Body and female thread to be installed in jig and fixture systems. Clamping jaws, clamping arms, claw feed systems etc. for transmission of high turning moments and holding forces, for instance on cast and forged pieces.
RoHS-compliant: yes
square with ribbed carbide insert
Material: body: tool steel, blackenedinsert: carbide plate, brazed-in
Basic body with internal thread for installation in clamping fixtures, clamping jaws, clamping arms, gripper systems, etc. For transmitting high torques and holding forces, e.g. on cast or forged parts. Square design is suitable for arrangement in series, e.g. support bar for high holding forces.
RoHS-compliant: yes
with thrust point
Material: steel, grade 5.8STH: thrust point hardenedSTU: thrust point unhardenedSTZ: zinc plated, blue passivated, thrust point unhardenedstainless steel 14301NI: thrust point unhardenedwith hexagon socket
The thrust point of these screws DIN 6332 SM 1240 is designed to be used with or without the thrust pad SM 1270 or SM 1270-1 for clamping. The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw. Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created.
Mountage: You must hold the thrust point that the snap ring is sitting in the groove and the open side is looking downstairs. The bolt is to be pushed in by holding it incline as much as possible to the open side of the snap ring.
RoHS-compliant: yes
Positioning footadjustable, with threaded pin
Bolt: SteelSupport surface: Induction hardenedNut: Steelthread not hardened
Form B: spherical support surfaceForm F: ribbed support surface
To be used as seats, stops and thrust pads.
RoHS-compliant: yes
Positioning foot / Support bolt
Material: steel, case-hardened, blackened. Thread not hardened.
Form A: with thread and plain surfaceForm B: with thread and spherical surfaceForm C: with thread and ribbed surfaceForm D: with female thread and plain surfaceForm E: with female thread and spherical surfaceForm F: with female thread and ribbed surface
To be used as seats, stops and thrust padsin fixture construction and general machine and device construction.
RoHS-compliant: yes
with ribbed carbide insertwith threaded bolt
body: heat-treated steel, blackenedinsert: carbide waffled, brazed-in
For work pieces showing a rough surface.
RoHS-compliant: yesSupport pins / positioning feet with carbide insert with serrated contact surface are used as supports, stops and thrust pieces in fixture construction and general machine and equipment construction, especially for workpieces with a rough surface.
with carbide insert with pointwith threaded bolt
body: heat-treated steel, blackenedinsert: carbide plate with point, brazed-in
For work pieces showing a rough surface.
RoHS-compliant: yesSupport pins / positioning feet with carbide insert with point are used as supports, stops and thrust pieces in fixture construction
and general machine and equipment construction,
especially for workpieces with a rough surface.
Positioning foot with plastic contact surface
Material:Insert: plastic (PEEK), bluethreaded bushing: stainless steelthreaded pin: stainless steelbody:KU: plastic (PEEK), blueNI: stainless steel 1.4305
Form A...KU: with male thread, body made of plastic (PEEK), plain surfaceForm A...NI: with male thread, stainless steel body, plastic insert, plain surfaceForm D...KU: with female thread, body made of plastic (PEEK), plain surfaceForm D...NI: with female thread, stainless steel body, plastic insert (PEEK), plain surface
RoHS-compliant: yes
Pins with plastic contact surface can be used as protective supports,stops, and thrust pads. This protects high-quality surfaces from damage.Temperature resistant -60° to 250°C.
with ribbed contact surfacewith internal thread
Material: free cutting steel, case-hardened, blackened
RoHS-compliant: yesSupport pins with a ribbed support surface are used as supports, stops and pressure pieces in general machine and equipment construction, especially for workpieces with rough surfaces.
Material: ST: steel C45 (equal St 60), brightNI: stainless steel 1.4571
bright, rounded corners
RoHS-compliant: yesParallel keys according to DIN 6885 A / ISO 773 are machine elements,
which are used, for example, in the shaft-hub connection.
They are inserted into the shaft and hub groove and thus transmit torques through a positive drive connection between the shaft and hub.
Support element
with commuting plastic bearing surface
Material:ball element: stainless steel 1.4305nut: stainless steel A2pad: plastic (PEEK), blue
RoHS-compliant: yes
Can be used as screw-in foot or thrust pad, with internal hexagon.The plastic coating is gentle and protects high-quality surfaces. In addition, the oscillating seating is suitable for non-parallel surfaces.Temperature resistant -60° to 250°C.
with internal thread or threaded pin
Material: Heat-treated steeltempered, blackened
Surface induction hardened and ground
RoHS-compliant: yes
To be used as solid and precise seat and stop.The pin-shaped form of this locatingpin allows an application in components withnarrow seating points.
with flattened ball
Material:
Form G + JST: body: heat-treated steel, tempered ball: ball-bearing steel, hardened
Form G
NI: body: 1.4057, heat-treated ball: 1.3541, nickel-plated
Form G: flat-faced ball, plain surfaceForm J: flat-faced ball, ribbed surface
RoHS-compliant: yesSelf-aligning pad with fit tolerance n6 made of steel or stainless steel with movable smooth or ribbed contact surfaces are used as stops, supports or thrust pieces for clamping, tensioning and supporting. They are suitable for installation in clamping elements, also for load transfer between non-parallel surfaces. The movable ribbed support surface gives clamped components special support.
self-resetting
Material:
Form G + Jspring element: Thermoplastic PURST: body: heat-treated steel, tempered, phosphated ball: ball-bearing steel, hardened, bright
Form G
NI: body: stainless steel 1.4057, heat-treated ball: 1.3541, nickel-plated
Form G: flat-faced ball, plain surfaceForm J: flat-faced ball, ribbed surface
RoHS-compliant: yes
Self-aligning pad
self-resetting with fit tolerance n6 made of steel or stainless steel with movable smooth or ribbed contact surfacesare used as stops, supports or thrust pads for clamping, tensioning and supporting.They are suitable for installation in clamping elements,
also for load transfer between non-parallel surfaces.The movable ribbed support surface provides special support for clamped components.The return of the support to the parallel position prevents
prevents the ballfrom jamming in an inclined position when the workpiece is inserted.
with flattened ballwith thread
Material:
Form C + FST: body: heat-treated steel, temperedball: ball-bearing steel, hardened
Form C
NI: body: 1.4057, heat-treatedball: 1.3541, nickel-plated
Form C: flat-faced ball, plain surfaceForm F: flat-faced ball, ribbed surface
RoHS-compliant: yesSelf-aligning pads with threaded pin made of steel or stainless steel
with movable smooth or ribbed contact surfaces are used as stops, supports or thrust pads for clamping, tensioning and supporting.
They are suitable for installation in clamping elements, also for load transfer between non-parallel surfaces.
The movable ribbed support surface provides special support for clamped components.
adjustablewith threaded pin
Material:
Form C + FST: body: steel, heat-treated steel, tempered, phosphatedball: hardened, brightnut: steel, blackened
Form C
NI: body: stainless steel 1.4057, heat-treatedball: stainless steel 1.3541, nickelplatednut: stainless steel
Form C: flat-faced ball, plain surfaceForm F: flat-faced ball, ribbed surface
RoHS-compliant: yesSelf-aligning pads with threaded pin made of steel or stainless steel with movable smooth or ribbed contact surfaces are used as stops, supports or thrust pieces for clamping, tensioning and supporting. They are suitable for installation in clamping elements, also for load transfer between non-parallel surfaces. The movable ribbed support surface provides special support for clamped components.
