"Crocodile“ clamp |SM 1105

SCHOLZ MECHANIK GmbH

Variants table
Form	Groove	Width 1	Product number	Unit price	Buy

Product information " "Crocodile“ clamp |SM 1105 "

with counterholder, adjustable

Material: steel
body: tempered and zinc plated

Form A: without stud bolt
Form B: with stud bolt

With captive compression piece and counter bearing.
Specified clamping forces in optimal clamping position (smallest distance from the clamping screw to the clamping point).
Clamping forces can vary depending clamping, strength class of the clamping screw and condition of the thread (lubrication).
Use for all clamping tasks over T-grooves and nuten und threaded holes.
The compression piece and the counterholder are connected undetachably to the clamping shoe.
The clamping plate is equipped with two clamping surfaces and can be easily turned depending on use.

RoHS-compliant: yes

Material:	Steel
Surface:	Steel - zinc plated
Type:	Mechanical clamping elements

Zubehör

Collar nut - DIN 6331 | SM 1090

Material:ST: heat-treated steel, tempered, grade 10NI: stainless steel RoHS-compliant: yes

From €4.45* incl. VAT

Details

Stud screw - DIN 6379 | SM 1100

Material: steel, heat-treated: M06 - M12: grade 10.9M14 - M42: grade 8.8M12 - M24: grade 12.9 rolled threadRemaining quantities are available from SM 1100M22X250 8.8, SM 1100M22X350 8.8. The articles are not available for re-purchase. RoHS-compliant: yes

From €1.38* incl. VAT

Details

T-bolt -DIN 787 | SM 1105

Material: steel, heat-treated M06 - M12 grade: 10.9M14 - M42 grade: 8.8M10 - M24 grade: 12.9 forged, T-slot guid-faces milled, rolled thread. RoHS-compliant: yes

From €9.82* incl. VAT

Details

Washer, ground | SM 1125-1

surface-ground on both sidessim. to DIN 6340 Material: steel, hadened and on both sides surface grinded RoHS-compliant: yes

From €2.95* incl. VAT

Details

Ähnliche Artikel

Plain clamp, adjustable | SM 1083

with adjusting screw Material: Clamp: heat treated steel, varnishedSupport screw: heat-treated steel T-slot bolt: tempered steel Form A: without T-bolt Form B: with T-bolt RoHS-compliant: yesForm A: Clamps without clamping screw are available in sizes 12 and 14, 16 and 18 as well as 20 and 22. Form B: The height h depends on the groove depth according to DIN 650 and the screw-in length of the nut.The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €35.21* incl. VAT

Details

Adjustable clamp | SM 1084

cranked, with goose-neck Material: Clamp: heat treated steel, varnishedSupport screw: heat-treated steelT-slot bolt: tempered steelForm A: without T-boltForm B: with T-bolt RoHS-compliant: yesForm A: Clamps without clamping screw are available in sizes 12 and 14, 16 and 18 as well as 20 and 22. Form B: The height h depends on the groove depth according to DIN 650 and the screw-in length of the nut.The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €46.14* incl. VAT

Details