To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Knurled screw - DIN 464 | SM 1250

SCHOLZ MECHANIK GmbH

Variants table
Diameter 1	Length	Material	Product number	Unit price	Buy

Product information "Knurled screw - DIN 464 | SM 1250"

high type

Material:
STV: steel, property class 5
visible face fine turned
zinc plated
STB: steel, property class 5
visible face fine turned
blackened
NI: stainless steel 1.4305 / AISI 303
matte shot-blasted

These knurled screws are turned in one piece.
Thread extends to the head with run-out and without undercut, head surface finely turned.
The knurling ensures a good grip.

Knurled screws enable quick and easy manual fastening or removal of components and are mainly used where repeated handling and quick removal are required, where repeated handling and quick loosening or tightening is required without the need for tools. Typical areas of application are mechanical engineering, electrical engineering and precision mechanics, but also in medical technology and measuring instruments.

RoHS-compliant: yes

on request:
A4: stainless steel 1.4404 / AISI 316L
matte shot-blasted
MS: brass (individual sizes)

Compliance:	RoHS compliant
DIN / ISO:	DIN 464
Material:	Brass, Knob / Handle: Stainless Steel, Knob / Handle: Steel, Stainless steel, Steel
Speciality:	With knurling, With threaded stud
Surface:	Stainless steel - matt blasted, Steel - burnished, Steel - zinc plated
Type of use:	Knobs, Knurled screws / knobs, Screws

Similar Items

Knurled nut - DIN 466 | SM 1251

Knurled nut - DIN 466 | SM 1251

high type Material:STV: steel, property class 5visible face fine turnedzinc plated, blue passivatedSTB: steel, property class 5visible face fine turnedblackenedNI: stainless steel 1.4305 / AISI 303matte shot-blasted The nuts are knurled to ensure a good grip. Knurled nuts to DIN 466 therefore enable quick and easy manual fastening or removal of components and are primarily used where repeated handling and quick loosening or tightening is required without the need for tools. Typical areas of application are mechanical engineering, electrical engineering and precision mechanics, but also in medical technology and measuring instruments. RoHS-compliant: yeson request: A4: stainless steel 1.4404 / AISI 316Lmatte shot-blastedMS: brass (individual sizes)

From €0.52* incl. VAT

Knurled screw - DIN 653 | SM 1252

Knurled screw - DIN 653 | SM 1252

flat type Material: STV: steel, property class 5, zinc plated, visible face fine turnedSTB: steel, property class 5, blackened, visible face fine turnedNI: stainless steel 1.4305 / AISI 303, matte shot-blasted All flat knurled screws SM 1252 are produced from one piece and threaded over its full length. The nuts are knurled to provide a good grip. Knurled screws to DIN 653 therefore enable quick and easy manual fastening or removal of components and are primarily used where repeated handling and quick loosening or tightening is required without the need for tools. Typical areas of application are mechanical engineering, electrical engineering and precision mechanics, but also in medical technology and measuring instruments. RoHS-compliant: yeson request: A4: stainless steel matt blasted

From €1.02* incl. VAT

Knurled screw | SM 1252-1

Knurled screw | SM 1252-1

flat type with a thin shank for loss prevention Material: STB: steel, property class 5NI: stainless steel 1.4305 / AISI 303, matte shot-blasted All flat knurled screws SM 1252-1 are produced from one piece and threaded over its full length. Visible face finde turned.The nuts are knurled to ensure a good grip. These knurled screws can be secured against "loss" by the thin shaft. For this purpose, instead of a normal through/threaded hole, a thread d1 must be provided on both sides, possibly with a corresponding hole d5 must be provided on both sides. RoHS-compliant: yes

From €2.21* incl. VAT

Knurled nut - DIN 467 | SM 1253

Knurled nut - DIN 467 | SM 1253

flat type Material:STV: steel, property class 5, zinc plated, visible face fine turned STB: steel, property class 5, blackened, visible face fine turnedNI: stainless steel 1.4305 / AISI 303, matte shot-blasted The nuts are knurled to ensure a good grip. Flat knurled nuts to DIN 467 allow components to be fastened or removed quickly and easily by hand. They are mainly used where repeated handling and quick loosening or tightening is required without the need for tools and also in devices that require frequent adjustment or maintenance. Typical areas of application include mechanical engineering, electrical engineering, equipment manufacturing and precision mechanics, as well as medical technology and measuring devices. RoHS-compliant: yeson request:A4: stainless steel matt blasted

From €0.43* incl. VAT

Knurled nut, stainless steel | SM 1254

Knurled nut, stainless steel | SM 1254

stainless steel Material:stainless steel 1.4301 / AISI 304 MT: matte shot-blasted finishPL: highly polished The nuts are knurled to ensure a good grip. These knurled design makes them particularly suitable for an environment with hygienic requirements. The knurled nuts enable quick and easy manual fastening or removal of components. They are primarily used where repeated handling and quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €9.22* incl. VAT

Knurled nut | SM 1254-1

Knurled nut | SM 1254-1

from aluminium Material:Aluminium, anodizedEL = naturalRT = redGR = greenBL= blueSW = blackThe nuts are knurled for a good grip and ease of handling. Made from aluminum, these knurled bushes are the better option compared to those made from steel when weight needs to be saved. The knurled nuts enable quick and easy manual fastening or removal of components. They are mainly used where repeated handling and quick loosening or tightening is required without the need for tools.RoHS-compliant: yes

From €4.26* incl. VAT

Knurled screw | SM 1255

Knurled screw | SM 1255

stainless steel Material:stainless steel 1.4301 / AISI 304 MT: matte shot-blasted finishPL: highly polished The knurling of the knobs ensures a good grip and ease of handling. These kind knurled design makes these knurled screws particularly suitable for an environment with hygienic requirements. The SM 1255 knurled screws enable quick and easy manual fastening or removal of components. They are primarily used where repeated handling and quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €10.33* incl. VAT

Quick acting knurled nut | SM 1259

Quick acting knurled nut | SM 1259

Quick release nut Material:ST: steel, property class 5, blackenedNI: stainless steel 1.4305 / AISI 303, matte shot-blastedQuick-release knurled nuts are used when the nut needs to be completely removed after loosening and quickly returned to the clamping position. The knurled nut is pushed onto the threaded bolt at oblique. When tightening, the nut engages in the threads of the bolt. The connection is only reliable if the clamping surface is at right angles to the threaded bolt.The knurling of the knobs ensures a good grip and ease of handling. RoHS-compliant: yes

From €5.44* incl. VAT

Knurled nut - DIN 6303 | SM 1260

Knurled nut - DIN 6303 | SM 1260

made of steel Material:STB: steel, property class 5, blackenedNI: stainless steel 1.4305 / AISI 303, matte shot-blasted Form A: without dowel holeForm B: with dowel holeThe knurling of the nuts ensures a good grip and ease of handling. The knurling pitch differs from DIN and is larger and therefore easier to grip. The pin hole d5 in the knurled nuts form B is intended for the use of dowel pins or dowel pins. Drill and ream the pin hole during assembly. pins: DIN 7 - SM 1022 or SM 1020 are not included in the scope of delivery and must be ordered separately. RoHS-compliant: yes

From €1.63* incl. VAT

Knurled screw | SM 1261

Knurled screw | SM 1261

from plastic Material:handle: plastic, Techopolymer (Polyamide PA)black, shiny finishthreaded bolt:ST: steel, zinc plated, blue passivatedNI: stainless steel 1.4567 / AISI 304 CuThe knurling of the nuts ensures a good grip and ease of handling. These knurled knobs enable quick and easy manual fastening or removal of components. They are mainly used where repeated handling and quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €0.95* incl. VAT

Knurled nut | SM 1262

Knurled nut | SM 1262

from plasticwith steel bushing Material:handle: plastic, Technoplymer (Polyamide PA)black, shiny finish threaded bushing:ST: steel, zinc plated, blue passivatedNI: stainless steel 1.4305 / AISI 303With threaded through hole.The knurling of the nuts ensures a good grip and ease of handling.These knurled knobs enable quick and easy manual fastening or removal of components.They are mainly used where repeated handling and quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €1.08* incl. VAT

Knurled screw | SM 1262-1

Knurled screw | SM 1262-1

from plastic Material:handle: plastic, Thermoset (PF 31)black, shinyscrew: steel, galvanizedThe knurling of the handles ensures a good grip and ease of handling. These knurled knobs enable quick and easy manual fastening or removal of components. They are mainly used where repeated handling and quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €0.84* incl. VAT

Knurled knob | SM 1262-2

Knurled knob | SM 1262-2

plastic threaded bushing brass Material:handle: plastic, polyamide (PA) glass fibre reinforcedtemperature resistant -30 °C to +130 °Cthreaded bushing: brass colors / surfaces:SG = black-grey RAL 7021, matte finishRT = red RAL 3000, matte finishOR = orange RAL 2004, matte finishGB = yellow RAL 1021, matte finishGN = green RAL 6017, matte finishGR = grey RAL 7035, matte finishBL = blue RAL 5024, matte finish Used as an operating part for pulling or pushing movements, also for light clamping operations as knurled nuts. The knurling of the plastic knobs and the concave recess ensure a good grip and ease of handling. Quick and easy manual fastening or removal of components possible. Used for repeated handling and when quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €1.71* incl. VAT

Knurled knob screw | SM 1262-3

Knurled knob screw | SM 1262-3

plasticthreaded stud steel Material:handle: plastic, polyamide (PA)glass fibre reinforcetemperature resistant -30 °C to +130 °Cthreaded bolt: steelzinc plated, blue passivated colors / surfaces:SG = black-gray RAL 7021, matte finish Used as an operating part for pulling or pushing movements, also for light clamping operations as knurled screw.The knurling of the plastic knobs and the concave recess ensure a good grip and ease of handling.Quick and easy manual fastening or removal of components possible. Used for repeated handling and when quick loosening or tightening is required without the need for tools. RoHS-compliant: yes

From €1.74* incl. VAT

Knurled screw | SM 1263

Knurled screw | SM 1263

plastic Material:handle: plastic, technopolymer (Polypropylene PP) reinforced, shock-resistanttemperature range up to 90°Cthreaded stud: steel, zinc plated, blue passivatedcolors / surfaces:SW = black, RAL 9005, matte finish Small square truncated pyramids create the special profile of the edging. They are characteristic of the shape and function of the cord grips and ensure good grip and manageability. This allows maximum torque to be generated without uncomfortable skin strain. Quick and easy manual fastening or removal of components. Used for repetitive handling and when quick loosening or tightening is required without the need for tools. RoHS-compliant: yeson request: with cap in this colours:OR = orange, RAL 2004, matte finishGR = gray, RAL 7035, matte finishGB = yellow, RAL 1021, matte finishBL = blue, RAL 5024, matte finishRT = red, RAL 3000, matte finishGN = green, RAL 6017, matte finish

From €2.40* incl. VAT

Knurled nut | SM 1264

Knurled nut | SM 1264

Knurled knobplastic Material: handle: plastic, technopolymer (Polypropylene PP)reinforced, shock-resistanttemperature range up to 90°Cbushing: brassSmall square truncated pyramids create the special profile of the edging. They are characteristic of the shape and function of the cord grips and ensure good grip and manageability. This allows maximum torque to be generated without uncomfortable skin strain. Quick and easy manual fastening or removal of components. Used for repetitive handling and when quick loosening or tightening is required without the need for tools. RoHS-compliant: yeson request: with cap in this colours:OR = orange, RAL 2004, matte finishGR = gray, RAL 7035, matte finishGB = yellow, RAL 1021, matte finishBL = blue, RAL 5024, matte finishRT = red, RAL 3000, matte finishGN = green, RAL 6017, matte finish

From €2.40* incl. VAT