SUPERCRAFT Soft-face hammer | SM 3377A

SCHOLZ MECHANIK GmbH

from €38.23*

€38.23*

Prices incl. VAT plus shipping costs

Delivery time: 1-3 days working days

Delivery time: See variant in the table

This product is available in 8 versions.

Show all variants

Form

Head diameter

25,00

30,00

35,00

40,00

45,00

50,00

60,00

70,00

Product number: 240054

Description Datasheet

Form	Head diameter	Product number	Unit price	Buy

Product information "SUPERCRAFT Soft-face hammer | SM 3377A"

SUPERCRAFT Soft-face hammer with vibration-reducing

Tubular head: fi lled with steel shot
Handle: steel tube and ergonomic rubber grip
Impact inserts: Nylon, white

Note:
Non-rebound, for extra powerful strikes | Noise-dampening and gentle on the joints | Completely robot-welded | Very safe handle-head-connection due to aluminium wedge and safety pin | Wear-resistant powder coating prevents corrosion | Inserts made of special nylon with maximum strength | No chipping (even at tempeatures below zero) | Break-proof steel tube handle with ergonomic non-slip rubber grip | Handle protection sleeve acts as an overstrike protector | Handle and inserts are replaceable

The tubular head of the SUPERCRAFT mallets is fi lled with steel shot. The resulting effect is that the energy of the steel shot is transferred with a slight delay when the mallet's contact surface hits the workpiece. The reduced rebound allows the impact energy to be absorbed with perfect effi ciency. The result is impact of exceptional magnitude. Working with SUPERCRAFT sledge hammers is much safer, easier on the joints and quieter than with ordinary steel hammers.

Application Areas:
Positioning and joining of workpieces, assembly of sharp-edged workpieces, straightening work, housing assembly, plant construction, maintenance, repair and overhaul work, assembly and repair work in the automotive and truck sector, sheet-metal working

Material:	Steel
Typ 9:	Hammers

Zubehör

CAD Data

Renewable drill bushing - DIN 173 A | SM 1002-1

Quick-change bushingDIN 173 A Sheet 1Material: special steelhardened and groundhardness: HRc 63±1Basic bushings for this: Drill bushings SM 1000, 1000-1, 1000-2 and 1001.collar screws: SM 1003-1dowel pins: SM 1003-3 / SM 1022RoHS-compliant: yesPlug-in drill bushings according to DIN 173 A are precisely manufactured guide elementsthat are mainly used for drilling holes with the aid of drilling devices, as they enable quick changes between different drill diameters. Quick-change bushings serve to guide the drill precisely, enable exact, repeatable drilling and stabilise the drill when it enters the workpiece. The bushings are usually inserted into fixtures or components via SM 1000 / SM 1001 base bushings (DIN 179/172) and secured against rotation with an inserted SM 1003-3 cylindrical pin, which strikes against an SM 1003-1 collar screw. The main use of SM 1002-1 insert drill bushings is for pre-drilling parts for further reaming or thread cutting operations.

Variants from €19.22* incl. VAT

€64.01* incl. VAT

Details

CAD Data

Knurled bushing F7 | SM 1000-3

Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radius without adhesive grooves Form B: with two radii without adhesive grooves RoHS-compliant: yes Particularly suitable for mounting in aluminium, plastic or wood materials by pressing in or gluing.On request: Form CA: with adhesive grooves and one radius Form CB: with adhesive grooves and two radii Suitable for 3D-printed components to achieve functional surfaces.

Variants from €2.80* incl. VAT

€4.01* incl. VAT

Details

CAD Data

Drill bushing F7, stainless steel - sim. to DIN 172 | SM 1001N

Positioning bush with collar stainless steel similar to DIN 172 / ISO 4247:1977 Material: Stainless steel 1.4112hardened and groundHardness: HRc 56±1 Form A: with one radius without groovesForm B: with two radiuses without grooves RoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.

Price on request

Details

CAD Data

Precision leader pin | SM 4070

Guide pin with collar for Guide bushings SM 4030Material: 1.7139Hardness: HRc 60±1Surface: ground RoHS-compliant: yes

From €5.63* incl. VAT

Details

CAD Data

Renewable drill bushing - DIN 173 E/ER/ES | SM 1002-2

Replaceable bushing or Quick-release bushingDIN 173 E/ER/ES Part 2 Material: special steelhardened and groundHardness: HRc 63±1 Form E: quick release drill bushingForm ES: with stop pinForm ER: with stop pin and insertion groove These renewable drill bushings fit only with basic bushes SM 1002-3 form G or form H. fixing screws: SM 1003-2dowel pins: SM 1003-3 RoHS-compliant: yes Plug-in drill bushings according to DIN 173 E / ES / ER Part 2 are precisely manufactured guide elements that are mainly used for drilling holes with the aid of drilling devices, as they enable quick changes between different drill diameters. Replaceable bushings or quick-change bushings with stop pins are used to guide the drill precisely and enable accurate, repeatable drilling and to stabilise the drill when it enters the workpiece.The bushings are usually inserted into fixtures or components via base bushings SM 1002-2 G / H and secured against rotation with SM 1003-2 collar screws as bayonet locks. An inserted SM 1003-3 cylindrical pin, which strikes against an SM 1003-2 collar screw, acts as an additional anti-rotation device.The main use of SM 1002-2 plug-in drill bushings is for pre-drilling parts for further reaming or thread cutting operations.

Variants from €18.74* incl. VAT

€62.49* incl. VAT

Details

CAD Data

Knurled drill bushing - sim. to DIN 179 | SM 1000-1

similar to SM 1000 - DIN 179 Material: Special steelhardened and groundHardness: HRc 63±1Form A: with one radiusForm B: with two radiuses RoHS-compliant: yesWith cording and adhesive grooves for a secure hold in the bonding point.

Variants from €2.63* incl. VAT

€3.76* incl. VAT

Details

CAD Data

Drill bushing F7, stainless steel - sim. to DIN 179 | SM 1000N

Positioning bushing sim. to DIN 179 / ISO 4247 cylindrical, made of stainless steelMaterial: Stainless steel 1.4112hardened and groundHardness: HRc 56±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

Variants from €4.81* incl. VAT

€34.27* incl. VAT

Details

CAD Data

Guide bushing | SM 4030

with collarfor Precision leader pins SM 4070Material: 1.7139Hardness: HRc 60±1Surface: ground RoHS-compliant: yes

From €6.50* incl. VAT

Details

CAD Data

Drill bushing F7, through hardened - sim. to DIN 179 | SM 1000D

Positioning bushingsim. to DIN 179 / ISO 4247 cylindrical, through hardened Material: Tool steelhardened and groundHardness: through hardened to HRc 63±1Form A: with one radius Form B: with two radiusesRoHS-compliant: yesLocating hole in the workpiece to ISO tolerance H6 or H7.For other dimension combinations, see SM 1005. Drill bushes from SCHOLZ MECHANIK are used in all manufacturing companies as a cost-effective and wear-resistant component. No longer just for precise drill guidance, but also in combination with new production processes - e.g. 3D printing - the drill bush can be used to quickly produce clamping fixtures, measuring gauges, clamping supports, etc.Drill positioning bushes are important and useful elements for placement and grid plates for turning and milling centres. Their high hardness and tight tolerances ensure very high repeat accuracy and a long service life.Assembly:the drill diameter should correspond to the bushing diameter,press in the bushing angular with a flat mandrel or drive in with Soft-face mallet SM 3366A.

Variants from €5.68* incl. VAT

€37.91* incl. VAT

Details

CAD Data

Basic bushing H7 | SM 1002-3

DIN 173 G und H Part 2for Renewable drill bushings DIN 173 E/ER/ES SM 1002-2 Material: special steelhardened and groundHardness: HRc 63±1 Form G: with headForm H: without head For renewable drill bushes SM 1002-2.Other dimensions look for SM 1274-8. RoHS-compliant: yes

Variants from €4.62* incl. VAT

€6.90* incl. VAT

Details