Clamping lever, tension lever

Ähnliche Artikel

Clamping device "actima", | SM 1088-9

push-pull clamps Material:housing: Thermoplastic, blackbody: steel, blackenedball knob: DIN 7708 - thermosetting plastic (PF 31) red similar to RAL 3003accessories: steel, blackened Form QRZ: with transverse axis in the bore, pull to rightForm QLZ: with transverse axis in the bore, pull to leftForm BRZ: with throughgoing bore, pull to rightForm BLZ: with throughgoing bore, pull to leftForm QRD: with transverse axis in the bore, push to rightForm QLD: with transverse axis in the bore, push to leftForm BRD:with throughgoing bore, push to rightForm BLD: with throughgoing bore, push to left AccessoryForm K: TaperForm P: V-blockForm S: Disc The compact clamping element can be converted between pull and push clamping strain, depending on the model. The travel path is 10 mm. Within the short clamp travel of 2 mm, self-locking occurs in any position. The maximum permitted clamping force is 4.9 kN. RoHS-compliant: yes

From €30.83* incl. VAT

Details

Tension lever | SM 1175

rigidwith angled lever Material: stainless steel, surface matt, shot-blastedball knob: DIN 319, plastic, black Form E: angled lever with threaded bore Tension levers are used as clamping element as well as operating levers. RoHS-compliant: yes

From €18.59* incl. VAT

Details

Tension lever | SM 1177

adjustablewith screw/threaded studMaterial:Circlip: plastic (polyacetal POM)ball knob: DIN 319 thermoset plasticblack shiningST: steel blackened,screw: grade 5.8NI: stainless steel 1.4305Hub and shaft: matt blastedForm E: lever angled, 20° angledForm D: straight lever For use with limited clamping range or specific clamping position. The threaded insert is detachably connected to the hub by a serration. The lever is adjusted by pulling or lifting the lever. The serration is released and the lever can be pivoted. Automatically engages when released. RoHS-compliant: yes

From €20.29* incl. VAT

Details

Clamp nut | SM 1193

sim. to DIN 99made from Metall Material:ST: steelzinc-plated, blue passivatedNI: stainless steel 1.4301matt, shot-blastedshaft butt-welded to nut Clamp nuts SM 1193 are a low cost alternativ for clamps DIN 99. RoHS-compliant: yes

From €3.77* incl. VAT

Details

Flat tensioning lever | SM 1194

adjustablewith threaded stud Material:safety circlip: Plastic, polyacetal (POM)Knob: ball knob SM 1265 - DIN 319plastic, phenolic resin (PF)black, shiny finishCover: plastic, polyvinyl chloride (PVC-U) light grayLever and screw:ST: steel, blackened,insert / screw grade 5.8NI: stainless steel AISI 303 / 1.4305 hub / shaft: matte shot-blasted Form D: straight leverForm E: angled lever, 15° These flat clamping levers are particularly low and are mainly used where the clamping range is limited or a certain clamping position is required, where the clamping range is limited or a specific clamping position is required. The threaded insert is detachably connected to the handle by a serration. Lever adjustment by pulling. Lifting the lever hub releases the serration and the clamping lever can be pivoted to the most favorable clamping position. Automatically engages when the handle is released. RoHS-compliant: yes

From €24.00* incl. VAT

Details

Flat tensioning lever | SM 1195

adjustable with threaded insert Material:safety circlip: Plastic, polyacetal (POM)Knob: ball knob SM 1265 - DIN 319plastic, phenolic resin (PF) black, shiny finishCover: plastic, polyvinyl chloride (PVC-U)light grayLever and insert:ST: steel, blackenedinsert / screw grade 5.8NI: stainless steel AISI 303 / 1.4305 hub / shaft: matte shot-blasted Form D: straight leverForm E: angled lever, 15° These flat clamping levers are particularly low and are mainly used where the clamping range is limited or a certain clamping position is required,where the clamping range is limited or a specific clamping position is required. The threaded insert is detachably connected to the handle by a serration. Lever adjustment by pulling. Lifting the lever hub releases the serration and the clamping lever can be pivoted to the most favorable clamping position. Automatically engages when the handle is released. RoHS-compliant: yes

From €23.74* incl. VAT

Details

Variants table
Diameter 1	Diameter 2	Form	Material	Product number	Unit price	Buy

Product information "Tension lever | SM 1176 "

adjustable
with internal thread

Materlal:
Knob: DIN 319; thermoset plastic glossy black
Circlip: Plastic (POM)
ST: Steel, burnished
NI: Stainless steel
Hub and shaft: matt blasted

Form E: lever angled, 20° angled
Form D: straight lever

For use with limited clamping range or specific clamping position. The threaded insert is detachably connected to the hub by a serration. The lever is adjusted by pulling or lifting the lever. The serration is released and the lever can be pivoted. Automatically engages when released.

RoHS-compliant: yes

Compliance:	RoHS compliant
Material:	Knob / Handle: Plastic, Lever: Stainless steel, Lever: Steel, Stainless steel, Steel
Speciality:	Lever angled , Lever straight, Locking by self-locking, With internal thread
Surface:	Stainless steel - matt blasted, Steel - burnished
Type of use:	Clamping lever / Tension lever, Lever

Tension lever | SM 1176

adjustable with internal thread

adjustable
with internal thread