Clamp with goose-neck - DIN 6316 | SM 1080

SCHOLZ MECHANIK GmbH

Variants table
Length	Material	Width 1	Product number	Unit price	Buy

Product information "Clamp with goose-neck - DIN 6316 | SM 1080 "

Material:
heat treated steel
varnished

RoHS-compliant: yes

The large clamping range enables flexible use when clamping workpieces and components,
e.g. in fixture construction, mechanical engineering and toolmaking.

DIN / ISO:	DIN 6316
Element type:	Clamping iron
Material:	Quenched and tempered steel
Surface:	varnished
Type:	Mechanical clamping elements

Accessory Items

Adjusting screw | SM 1083-1

Material: heat treated steelgrade 8.8 RoHS-compliant: yes

From €19.49* incl. VAT

Details

Universal step block | SM 1086-2

Universal step block (single) Material: heat-treated steel, varnished Steps 4.65 mm high and 2.30 mm wide. Can be combined with clamps SM 1065. All three sizes can be combined with each other. The clamping pads are also available in a wooden box in the following combination:8 pieces size 1,8 pieces size 2,4 pieces size 3,available as a set: see SM 1086-1. RoHS-compliant: yes

From €8.58* incl. VAT

Details

Collar nut - DIN 6331 | SM 1090

Material:ST: heat-treated steel, tempered, grade 10NI: stainless steel RoHS-compliant: yes

From €4.45* incl. VAT

Details

T-bolt -DIN 787 | SM 1105

Material: steel, heat-treated M06 - M12 grade: 10.9M14 - M42 grade: 8.8M10 - M24 grade: 12.9 forged, T-slot guid-faces milled, rolled thread. RoHS-compliant: yes

From €9.82* incl. VAT

Details

Washer, ground | SM 1125-1

surface-ground on both sidessim. to DIN 6340 Material: steel, hadened and on both sides surface grinded RoHS-compliant: yes

From €2.95* incl. VAT

Details

Step block - DIN 6318 | SM 1140-1

Stepped packing block for ClampsMaterial: special machine castingvarnishedbase and step faces milled RoHS-compliant: yes

From €32.36* incl. VAT

Details

Similar Items

Clamp, forked | SM 1050-01

Clamp, forked Material: Aluminium F48-55blue anodized RoHS-compliant: yesFork-shaped clamps made of aluminum can be combined with other clamping elements and thus adapted to different shapes and sizes of workpieces. Suitable for use in model making and on milling and measuring machines, for laboratory equipment and measuring devices with a table slot width of 8 mm and M6 mounting holes. Advantageous: - Gentle clamping of tools and workpieces; - Damage to the workpieces can be largely avoided; - low weight; - quick and clean handling.

From €12.35* incl. VAT

Details

Clamp with nose | SM1050-02

Clamp with nose Material: Aluminium F48-55blue anodized RoHS-compliant: yesClamps with nose made from aluminum are suitable for clamping any workpieces and components. Combined with other clamping elements, they can be adapted to different shapes and sizes of workpieces. Suitable for use in model making and on milling and measuring machines, for laboratory equipment and measuring devices with a table slot width of 8 mm and M6 mounting holes.advantageous: - Gentle clamping of tools and workpieces; - Damage to the workpieces can be largely avoided; - low weight; - quick and clean handling.

From €12.35* incl. VAT

Details

Clamp with round peg | SM 1050-03

Clamp with round peg Material: Aluminium F48-55blue anodized RoHS-compliant: yesClamping arms with a round clamping base made of aluminum are suitable for clamping any workpieces and components. Combined with other clamping elements, they can be adapted to different shapes and sizes of workpieces. Suitable for use in model making and on milling and measuring machines, for laboratory equipment and measuring devices with a table slot width of 8 mm and M6 mounting holes.advantageous:- Gentle clamping of tools and workpieces;- Damage to the workpieces can be largely avoided;- low weight;- quick and clean handling.

From €12.35* incl. VAT

Details

Double clamp | SM 1050-04

Double clamp for screws Material: Aluminium F48-55blue anodized RoHS-compliant: yesDouble clamps made from aluminium for support screws are suitable for clamping any workpieces and components. Combined with other clamping elements, they can be adapted to different shapes and sizes of workpieces. Suitable for use in model making and on milling and measuring machines, for laboratory equipment and measuring devices with a table slot width of 8 mm and M6 mounting holes.advantageous:- Gentle clamping of tools and workpieces;- Damage to the workpieces can be largely avoided;- low weight;- quick and clean handling.

From €14.28* incl. VAT

Details

Double clamps with noses | SM 1050-05

Double clamp with noses Material: Aluminium F48-55blue anodized RoHS-compliant: yesDouble clamps from aluminum with noses are suitable for clamping any workpieces and components. Combined with other clamping elements, they can be adapted to different shapes and sizes of workpieces. Suitable for use in model making and on milling and measuring machines, for laboratory equipment and measuring devices with a table slot width of 8 mm and M6 mounting holes.advantageous:- Gentle clamping of tools and workpieces;- Damage to the workpieces can be largely avoided;- low weight;- quick and clean handling.

From €14.88* incl. VAT

Details

Clamp with ball support | SM 1061

with flattened ballsim. to DIN 6314 clamp: heat treated steelblackenedball: ball-bearing steel hardened and bright Due to the flexible supported ball, these clamps can achieve distortion-free clamping to a large extent.Ball secured against turning.The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking. RoHS-compliant: yes

From €35.84* incl. VAT

Details

Clamp - DIN 6314 | SM 1060

flat, simple form Material: ST: heat treated steelvarnishedAL: Aluminium RoHS-compliant: yes (*marked items not acc. to DIN 6314)The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €11.04* incl. VAT

Details

Step clamp | SM 1065

Material: heat treated steelvarnishedCan be used withBoxed set of assorted clamping elements (in strong wooden box) SM 1086,Universal step block set (in strong wooden box) SM 1086-1 andUniversal step block (single) SM 1086-2.The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking. RoHS-compliant: yes

From €18.46* incl. VAT

Details

Clamp, forked - DIN 6315 B | SM 1070

bevelled Material: heat treated steelvarnished RoHS-compliant: yesThe large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €13.26* incl. VAT

Details

Forked clamp with nose | SM 1071

Material: heat treated steelvarnished RoHS-compliant: yesThe large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €42.49* incl. VAT

Details

Forked clamp - DIN 6315 C | SM 1075

with pin endDIN 6315 C Material: heat treated steelvarnished RoHS-compliant: yesThe large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €54.97* incl. VAT

Details

Plain clamp, adjustable | SM 1083

with adjusting screw Material: Clamp: heat treated steel, varnishedSupport screw: heat-treated steel T-slot bolt: tempered steel Form A: without T-bolt Form B: with T-bolt RoHS-compliant: yesForm A: Clamps without clamping screw are available in sizes 12 and 14, 16 and 18 as well as 20 and 22. Form B: The height h depends on the groove depth according to DIN 650 and the screw-in length of the nut.The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €35.21* incl. VAT

Details

Adjustable clamp | SM 1084

cranked, with goose-neck Material: Clamp: heat treated steel, varnishedSupport screw: heat-treated steelT-slot bolt: tempered steelForm A: without T-boltForm B: with T-bolt RoHS-compliant: yesForm A: Clamps without clamping screw are available in sizes 12 and 14, 16 and 18 as well as 20 and 22. Form B: The height h depends on the groove depth according to DIN 650 and the screw-in length of the nut.The large clamping range enables flexible use when clamping workpieces and components, e.g. in fixture construction, mechanical engineering and toolmaking.

From €46.14* incl. VAT

Details